圖片展示

JCK-3自動升降建材可燃性試驗爐

建材可燃性試驗爐是在正常的燃燒環境中,用小火焰直接沖擊垂直放置的試樣以測定建筑制品可燃性。建材可燃性試驗爐利用德國 Kleinbrenner(克萊因勃倫納)原理,在垂直方向小火焰直接沖擊下,用于測定B級建筑材料的燃燒性能(即用于建筑材料燃燒性能/阻燃等級B級的判定)。

  • 型號: JCK-3

  • 產品參數
  • 型號: JCK-3



一、使用范圍:

在老款產品基礎上新增試樣可控自動升降、本生燈可進退調節功能的升級產品,是嚴格依據國家標準GB8626-2007規定的而生產的的高配置建材燃燒等級測試儀器。

建材可燃性試驗爐是在正常的燃燒環境中,用小火焰直接沖擊垂直放置的試樣以測定建筑制品可燃性。建材可燃性試驗爐利用德國 Kleinbrenner(克萊因勃倫納)原理,在垂直方向小火焰直接沖擊下,用于測定B級建筑材料的燃燒性能(即用于建筑材料燃燒性能/阻燃等級B級的判定)。

1. Scope of use

On the basis of the old product, the upgraded product with controllable automatic lifting of the sample and the advance and retreat adjustment function of the Bunsen burner is added. It is a high-configuration building material combustion level test instrument produced in strict accordance with the national standard GB8626-2007.

The building material flammability test furnace uses a small flame to directly impact a vertically placed sample in a normal combustion environment to determine the flammability of building products. The building material flammability test furnace uses the German Kleinbrenner principle, under the direct impact of a small flame in the vertical direction, to determine the combustion performance of Class B building materials (that is, the combustion performance of building materials/flame retardant class B Level determination).


二、產品功能特點:

1.符合人機工程學的操作設計,試驗全部通過觸摸屏操作完成,自動化程度高,可存儲以往試驗結果,可調閱以往試驗數據

2.伺服電機驅動式樣架可控自動升降;

3.本生燈可進退調節;

4.1.5mm不銹鋼鋼板箱體;

5.2扇鋼化耐熱玻璃門雙角度觀察測試, 雙(帶鎖)方便實用

6.高壓自動點火,耐久燃燒;

7.點火源可自動傾斜45度;

8.火焰高度通過精密調節閥進行調節;

9.試樣架可以上下及前后進行移動;

10.配備兩種試樣夾。

11.火焰測量標尺;

12.自動化程度高,實驗數據精準、易操作;

13.箱體尺寸:94cmx40cmx80cm

14.材質:1.5mm不銹鋼

15.箱體底部為平置自然通風口,通風口由5cm*5cm方格通風口組成(真正1.5mm厚鋼板通風口,高50mm)保持氣流平整通過

16.做工細致,真正無焊點工藝

17.觸摸顯示屏:

a. 尺寸:7寸 有效顯示尺寸 長15.5cm 寬8.6cm;

b. 分辨率:800*480

c. 通訊接口 RS232、3.3V CMOS或TTL、串口方式

d. 儲存容量:1G

e. 采用純硬件FPGA驅動顯示,“零”啟動時間,上電即可運行

f. 采用M3+FPGA架構,M3負責指令解析,FPGA專注TFT顯示,保障速度和可靠性 

g. 主控制器均采用低能耗處理器,自動進入節能模式

2. Product features

1. The operation design conforms to the ergonomics, all the tests are completed through the touch screen operation, the degree of automation is high, the past test results can be stored, and the past test data can be accessed

2. Servo motor-driven style rack can be controlled and automatically lifted;

3. The Bunsen burner can be adjusted forward and backward;

4.1.5mm stainless steel plate box;

5.2 Double-angle observation test of tempered heat-resistant glass doors, double (with lock) is convenient and practical

6. High-pressure automatic ignition, durable combustion;

7. The ignition source can automatically tilt 45 degrees;

8. The flame height is adjusted by a precision adjusting valve;

9. The sample holder can move up and down and back and forth;

10. Equipped with two sample holders.

11. Flame measurement scale;

12. High degree of automation, accurate experimental data and easy operation;

13. Box size: 94cmx40cmx80cm

14. Material: 1.5mm stainless steel

15. The bottom of the box is a flat natural vent, which is composed of 5cm*5cm square vents (real 1.5mm thick steel plate vents, height 50mm) to keep the airflow smoothly through

16. Meticulous workmanship, truly no solder joint process

17. Touch screen:

a. Size: 7 inches, the effective display size is 15.5cm in length and 8.6cm in width;

b. Resolution: 800*480

c. Communication interface RS232, 3.3V CMOS or TTL, serial port

d. Storage capacity: 1G

e. Use pure hardware FPGA to drive the display, "zero" startup time, and it can run after power-on

f. Adopt M3+FPGA architecture, M3 is responsible for instruction analysis, FPGA focuses on TFT display to ensure speed and reliability

g. The main controller adopts low-energy processors and automatically enters energy-saving mode


三、主要技術參數:

1. 環境溫度:15℃~25℃;

2. 相對濕度:≤85%;

3. 供電電壓和功率:220V    50HZ   100W;

4. 氣源:純度不低于95%的商用 ,普通試驗也可用代替(涉及運輸安全氣源需用戶自備);

5. 本生燈對式樣施加火焰時間15s

6.單片機控制,數字顯示。

7.燒器孔徑為Φ0.17mm、本生燈火焰長度20mm±2mm,燃燒器可傾斜45°。

8.對試樣施加火焰(1s-99 s)±0.5s,可任意調節,精度±0.2s。

9.可燃氣源:純度95%以上的。

3. Main technical parameters

1. Ambient temperature: 15℃~25℃;

2. Relative humidity: ≤85%;

3. Supply voltage and power: 220V 50HZ 100W;

4. Gas source: commercial gas with a purity of not less than 95%, and ordinary tests can also be used instead (the user must prepare the gas source for transportation safety);

5. Bunsen burner applies flame to the pattern for 15s

6. Single-chip microcomputer control, digital display.

7. The burner aperture is Φ0.17mm, the Bunsen burner flame length is 20mm±2mm, and the burner can be tilted 45°.

8. Apply flame (1s-99 s) ±0.5s to the sample, which can be adjusted arbitrarily, with an accuracy of ±0.2s.

9. Combustible gas source: above 95% purity.

JCK-3自動升降建材可燃性試驗爐
建材可燃性試驗爐是在正常的燃燒環境中,用小火焰直接沖擊垂直放置的試樣以測定建筑制品可燃性。建材可燃性試驗爐利用德國 Kleinbrenner(克萊因勃倫納)原理,在垂直方向小火焰直接沖擊下,用于測定B級建筑材料的燃燒性能(即用于建筑材料燃燒性能/阻燃等級B級的判定)。
長按識別二維碼查看詳情
長按圖片保存/分享

JCK-3自動升降建材可燃性試驗爐

詢盤

咨詢表單:

  • 請輸入驗證碼

咨詢內容:


你還沒有添加任何產品

掃一掃關注我們

Copyright @ 2018 上海榮計達儀器科技有限公司.All Rights Reserved   滬ICP備11009963號-4     

上海市閔行區浦江鎮沈杜公路3259號                                                             網站地圖

Copyright @ VillaGrandis All Rights Reserved某某某有限公司版權所有        

ICP備案號180006020號-3

 

客服中心
熱線電話
13761118616
上班時間
周一到周日
二維碼
添加微信好友,詳細了解產品
使用企業微信
“掃一掃”加入群聊
復制成功
添加微信好友,詳細了解產品
我知道了
八戒体育【官网】